Caution / Notice / Hint

NOTE:

Before proceeding with the inspection, explain to the customer that the output DTC is related to temporary loss of the steering angle zero point calibration, such as when the power source voltage drops when the auxiliary battery is removed. Confirm whether this condition occurred.

HINT:

When DTC U0073/94, U0124/95 and/or U0126/63 is output together with DTC C1439/66 and/or C1445/66, inspect and repair the trouble areas indicated by DTC U0073/94, U0124/95 and/or U0126/63 first (Refer to DTC U0073/94: Control Module Communication Bus OFF; DTC U0120/96: Lost Communication with Starter / Generator Control Module; DTC U0124/95: Lost Communication with Lateral Acceleration Sensor Module; DTC U0126/63: Lost Communication with Steering Angle Sensor Module; DTC U0293/59: Communication Error from HV ECU [10/2015 - ] ).
When a speed sensor or the yaw rate and acceleration sensor (airbag ECU assembly) is malfunctioning, DTCs for the steering angle sensor may be output even when the steering angle sensor is normal. When DTCs for the speed sensor or yaw rate and acceleration sensor (airbag ECU assembly) are output together with other DTCs for the steering angle sensor, inspect and repair the speed sensor and yaw rate and acceleration sensor (airbag ECU assembly) first, and then inspect and repair the steering angle sensor.