LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Avalon Hybrid Limited >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake (Service Information) (Hybrid) >> Parking Brake Switch >> Inspection [10/2014 - ] >> Procedure

Inspection [10/2014 - ]: Procedure

  1. INSPECT PARKING BRAKE SWITCH ASSEMBLY 
    1. Measure the resistance between the connector terminal and the nut inside the parking brake switch assembly.
      GTY603991Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 Terminal
      *2 Nut
      *a On
      *b Off
      STANDARD RESISTANCE

      Tester Connection Switch Condition Specified Condition
      Terminal - Nut On (When shaft is not pressed) Below 1 Ω
      Terminal - Nut Off (When shaft is pressed) 10 kΩ or higher

      If the value is not as specified, replace the parking brake switch assembly.

scientia non olet · About LEMON Manuals