Inspection [10/2014 - ]: Procedure
- INSPECT BRAKE BOOSTER PUMP ASSEMBLY
- Measure the resistance according to the value(s) in the table below.TEXT IN ILLUSTRATION
*a Component without harness connected
(Brake Booster Pump Assembly)Standard Resistance
Tester Connection Condition Specified Condition A56-2 (BM1) - A56-4 (GND1) Always Below 10 Ω A57-2 (BM2) - A57-1 (GND2) Always Below 10 Ω A56-2 (BM1) - A57-2 (BM2) Always Below 1 Ω A56-4 (GND1) - A57-1 (GND2) Always Below 1 Ω
- Measure the resistance according to the value(s) in the table below.