LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Avalon Hybrid Limited >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Brake Control System (Service Information) (Hybrid) >> Skid Control Buzzer >> Installation [10/2014 - 10/2015] >> Procedure

Installation [10/2014 - 10/2015]: Procedure

  1. INSTALL SKID CONTROL BUZZER ASSEMBLY 
    1. Engage the clamp to install the skid control buzzer assembly.
    2. Connect the connector to the skid control buzzer assembly.
  2. INSTALL LOWER NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 35

  3. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 36

  4. INSTALL INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 37

  5. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH 

    Refer to PROCEDURE - Step 33

  6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 34

  7. INSTALL FRONT DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 35

  8. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 8

  9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 

    (Refer to PROCEDURE - Step 2 )

scientia non olet · About LEMON Manuals