Caution / Notice / Hint
NOTE:
- When replacing the brake actuator (brake booster with master cylinder assembly), perform initialization and calibration of the linear solenoid valve (Refer to INITIALIZATION [10/2014 - ] ).
- Inspect the fuses for circuits related to this system before performing the following inspection procedure.
HINT:
When C1202/68, C1241/41, C1252/52, C1253/53 and/or C1391/69 are output together with C1256/56, inspect and repair the trouble areas indicated by C1202/68, C1241/41, C1252/52, C1253/53 and/or C1391/69 first (Refer to DTC C1202/68: Master Reservoir Level Malfunction [10/2014 - 10/2015] , DTC C1202/68: Master Reservoir Level Malfunction [10/2015 - ] , DTC C1241/41: Low Battery Positive Voltage; DTC C1242/42: Open in IG1 / IG2 Power Source Circuit [10/2014 - ] , DTC C1252/52: Brake Booster Pump Motor on Time Abnormally Long; DTC C1253/53: Pump Motor Relay Malfunction [10/2014 - ] , or DTC C1391/69: Accumulator Leak Malfunction [10/2014 - ] ).