Caution / Notice / Hint
NOTE:
When replacing the brake actuator (brake booster with master cylinder assembly), perform initialization and calibration of the linear solenoid valve (Refer to INITIALIZATION [10/2014 - ] ).
HINT:
When C1364/61 is output together with C1214/62, inspect and repair the trouble areas indicated by C1364/61 first (Refer to DTC C1246/46: Master Cylinder Pressure Sensor Malfunction; DTC C1281/81: Master Cylinder Pressure Sensor Output Malfunction (Test Mode DTC) ; DTC C1364/61: Wheel Cylinder Pressure Sensor Malfunction [10/2014 - ] ).