Inspection [10/2014 - ]: Procedure
- INSPECT FUEL LID LOCK CONTROL OPENER ASSEMBLY
- Check the operation of the fuel lid with lock motor assembly.
- Apply auxiliary battery voltage to the fuel lid lock control opener assembly connector, and check that the fuel lid lock control opener assembly operates smoothly as follows.
OK
Measurement Condition Specified Condition Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 2Unlock Auxiliary battery positive (+) → Terminal 2
Auxiliary battery negative (-) → Terminal 1Lock If the result is not as specified, replace the fuel lid lock control opener assembly.
TEXT IN ILLUSTRATION*a Component without harness connected
(Fuel Lid Lock Control Opener Assembly)
- Apply auxiliary battery voltage to the fuel lid lock control opener assembly connector, and check that the fuel lid lock control opener assembly operates smoothly as follows.
- Check the operation of the fuel lid with lock motor assembly.