LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Avalon Hybrid Limited >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Deterrent System / Keyless Entry System (Service Information) (Hybrid) >> Glass Breakage Sensor Ecu >> Removal [10/2014 - ] >> Procedure

Removal [10/2014 - ]: Procedure

  1. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY 

    (Refer to REMOVAL [10/2014 - ] )

  2. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 37

  3. REMOVE GLASS BREAKAGE SENSOR ECU (w/o Remote Engine Starter System) 
    1. Disconnect the connector.
      GTY361742Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the nut.
    3. Disengage the guide to remove the glass breakage sensor ECU.
  4. REMOVE GLASS BREAKAGE SENSOR ECU WITH REMOTE ENGINE STARTER ECU (w/ Remote Engine Starter System) 
    1. Disconnect each connector.
      GTY361738Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the nut.
    3. Disengage the guide.
    4. Disengage the clamp and remove the glass breakage sensor ECU with remote engine starter ECU.
      GTY361739Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE GLASS BREAKAGE SENSOR ECU (w/ Remote Engine Starter System) 
    1. Remove the bolt and glass breakage sensor ECU from the remote engine starter ECU with bracket.
      GTY361785Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals