LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Avalon Hybrid Limited >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Deterrent System / Keyless Entry System (Service Information) (Hybrid) >> Certification Ecu >> Removal [10/2014 - ] >> Procedure

Removal [10/2014 - ]: Procedure

  1. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY 

    (Refer to REMOVAL [10/2014 - ] )

  2. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 37

  3. REMOVE ECU INTEGRATION BOX RH (w/ ECU Integration Box RH) 

    Refer to PROCEDURE - Step 3 . Refer to PROCEDURE - Step 27

  4. REMOVE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (w/ ECU Integration Box RH) 
    1. Disengage the 2 claws and remove the certification ECU (smart key ECU assembly) as shown in the illustration.
      GTY361747Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (w/o ECU Integration Box RH) 
    1. Disconnect each connector.
    2. Remove the bolt, nut and certification ECU (smart key ECU assembly).
      GTY361746Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals