Security Indicator Light Does not Blink [10/2014 - 10/2015]: Description
- The certification ECU (smart key ECU assembly) blinks the security indicator light (telltale light assembly) when the immobiliser is set (power switch off, or driver door is opened and closed with power switch on (IG)).
- The certification ECU (smart key ECU assembly) receives the security indicator light signal from the main body ECU (multiplex network body ECU) via CAN communication when the theft deterrent system is in the arming preparation state or alarm sounding state. Then, the certification ECU (smart key ECU assembly) blinks the security indicator light (telltale light assembly).