DTC B279C: Theft Deterrent System Presence Detection [10/2014 - 10/2015]: Description
This code is stored when a power management control ECU that is incompatible with the immobiliser system is installed to the vehicle.
| DTC Code | DTC Detection Condition | Trouble Area | DTC Output Confirmation Operation |
|---|---|---|---|
| B279C | A power management control ECU that is incompatible with the immobiliser system is installed (1 trip detection logic*). | Power management control ECU | Check for DTCs. |
- *: Only output while a malfunction is present.
VEHICLE CONDITION AND FAIL-SAFE OPERATION WHEN MALFUNCTION DETECTED
| Vehicle Condition when Malfunction Detected | Fail-safe Operation when Malfunction Detected |
|---|---|
| Hybrid control system cannot be started | - |
RELATED DATA LIST AND ACTIVE TEST
| DTC Code | Data List and Active Test |
|---|---|
| B279C | - |