LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Avalon Hybrid Limited >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Vehicle Approaching Speaker (Service Information) (Hybrid) >> Vehicle Approaching Speaker >> Inspection [10/2014 - ] >> Procedure

Inspection [10/2014 - ]: Procedure

  1. INSPECT VEHICLE APPROACHING SPEAKER ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY440711Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 (+) - 2 (-) Always 6 to 10 Ω
      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (Vehicle Approaching Speaker Assembly)

      HINT: 

      • Make sure that there are no problems such as looseness or play with the installation of the vehicle approaching speaker assembly.
      • Make sure that there are no abnormalities with the vehicle approaching speaker assembly such as the presence of foreign material or tears in the paper of the speaker cone.

      If the result is not as specified, replace the vehicle approaching speaker assembly.

scientia non olet · About LEMON Manuals