LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Avalon Hybrid Limited >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seats (Service Information) (Hybrid) >> Seat Variable Cushion Switch >> Inspection [10/2014 - ] >> Procedure

Inspection [10/2014 - ]: Procedure

  1. INSPECT SEAT VARIABLE CUSHION SWITCH 
    1. Measure the resistance according to the value(s) in the table below.
      GTY371475Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      2 - 5 Front switch pressed Below 1 Ω
      3 - 4
      1 - 5 Off Below 1 Ω
      3 - 4
      1 - 5 Rear switch pressed Below 1 Ω
      2 - 3
      TEXT IN ILLUSTRATION

      *1 Front
      *2 Rear
      *a Component without harness connected
      (Seat Variable Cushion Switch)

      If the result is not as specified, replace the seat variable cushion switch.

scientia non olet · About LEMON Manuals