LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Avalon Hybrid Limited >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seats (Service Information) (Hybrid) >> Rear Seat Cushion Heater >> Installation [10/2014 - ] >> Procedure

Installation [10/2014 - ]: Procedure

  1. INSTALL SEAT HEATER ASSEMBLY 
    1. Using a tacker, install the seat heater assembly to the bench type rear seat cushion cover with 10 new tag pins.

      HINT: 

      Use the same procedure for both the RH side and LH side.

  2. INSTALL BENCH TYPE REAR SEAT CUSHION COVER 

    See step  2 See step  2

  3. INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY 

    See step  3 See step  3

  4. INSTALL REAR SEAT CUSHION ASSEMBLY 

    See step  3

scientia non olet · About LEMON Manuals