LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Avalon Hybrid Limited >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seats (Service Information) (Hybrid) >> Lumbar Switch >> Installation [10/2014 - ] >> Procedure

Installation [10/2014 - ]: Procedure

  1. INSTALL FRONT LUMBAR POWER SEAT SWITCH 
    1. w/o Seat Position Memory System:
      1. Connect the connector to install the front lumbar power seat switch.
    2. w/ Seat Position Memory System:
      1. Engage the 4 claws to install the front lumbar power seat switch to the front seat cushion shield.
  2. INSTALL FRONT POWER SEAT SWITCH (w/ Seat Position Memory System) 

    Refer to PROCEDURE - Step 1

  3. INSTALL FRONT SEAT CUSHION SHIELD (w/o Seat Position Memory System) 

    See step  37 See step  37

  4. INSTALL FRONT SEAT CUSHION SHIELD (w/ Seat Position Memory System) 

    See step  38 See step  38

  5. INSTALL RECLINING POWER SEAT SWITCH KNOB (w/ Seat Position Memory System) 

    See step  39 See step  39

  6. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (w/ Seat Position Memory System) 

    See step  40 See step  40

  7. CONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY 

    See step  45 See step  45

  8. INSTALL FRONT SEAT ASSEMBLY 

    Refer to INSTALLATION [10/2014 - ] 

scientia non olet · About LEMON Manuals