Inspection [10/2014 - ]: Procedure
- INSPECT FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Switch Condition Specified Condition 1 - Switch body Not pushed (ON) Below 1 Ω Pushed (OFF) 10 kΩ or higher TEXT IN ILLUSTRATION*1 Switch Body *a Component without harness connected
(Front Door Courtesy Light Switch Assembly)If the result is not as specified, replace the front door courtesy light switch assembly.
- Measure the resistance according to the value(s) in the table below.