Inspection [10/2014 - ]: Procedure
- INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH
- Connect a positive (+) lead from the auxiliary battery to terminal 2 (B) and a negative (-) lead to terminal 1 (E).
- Check that the No. 1 interior illumination light assembly LH comes on.
OK
No. 1 interior illumination light assembly LH comes on.
TEXT IN ILLUSTRATION*a Component without harness connected
(No. 1 Interior Illumination Light Assembly LH)If the result is not as specified, replace the No. 1 interior illumination light assembly LH.
- Connect a positive (+) lead from the auxiliary battery to terminal 2 (B) and a negative (-) lead to terminal 1 (E).
- INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH
- Connect a positive (+) lead from the auxiliary battery to terminal 2 (+) and a negative (-) lead to terminal 1 (-).
- Check that the No. 1 interior illumination light assembly RH comes on.
OK
No. 1 interior illumination light assembly RH comes on.
TEXT IN ILLUSTRATION*a Component without harness connected
(No. 1 Interior Illumination Light Assembly RH)If the result is not as specified, replace the No. 1 interior illumination light assembly RH.
- Connect a positive (+) lead from the auxiliary battery to terminal 2 (+) and a negative (-) lead to terminal 1 (-).