Inspection [10/2014 - ]: Procedure
- INSPECT CONSOLE BOX ILLUMINATION LIGHT ASSEMBLY
- Connect a positive (+) lead from the auxiliary battery to terminal 2 and a negative (-) lead to terminal 1.
- Check that the console box illumination light assembly comes on.
OK
Console box illumination light assembly comes on.
TEXT IN ILLUSTRATION*a Component without harness connected
(Console Box Illumination Light Assembly)If the result is not as specified, replace the console box illumination light assembly.
- Connect a positive (+) lead from the auxiliary battery to terminal 2 and a negative (-) lead to terminal 1.