CD Sound Skips [10/2014 - ]: Procedure

1. Check that the CD is not deformed or cracked.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK

   No deformation or cracks on the CD.

Result: 

NG 

END (CD IS FAULTY) 

Result: 

OK 

See step  2

1. Check the CD.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK

   The CD is clean.

   NOTE:

   Do not use a conventional record cleaner or anti-static preservative.

   HINT: 

   If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

Result: 

NG 

CLEAN CD 

Result: 

OK 

See step  3

1. Replace the CD with a new or known good one and check that the malfunction disappears.

   OK

   Malfunction disappears.

Result: 

OK 

END (CD WAS FAULTY) 

Result: 

NG 

See step  4

1. Check the navigation ECU sub-assembly installation condition.
   1. Check that the navigation ECU sub-assembly is properly installed.

      OK

      The navigation ECU sub-assembly is properly installed.

Result: 

OK 

REPLACE NAVIGATION ECU SUB-ASSEMBLY 

(Refer to REMOVAL [10/2014 - ] )

Result: 

NG 

REINSTALL NAVIGATION ECU SUB-ASSEMBLY