Illumination for Panel Switch does not Come on with Tail Switch ON [10/2014 - ]: Procedure
- CHECK VEHICLE SIGNAL (OPERATION CHECK)
- Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check (Refer to OPERATION CHECK [10/2014 - 10/2015]
or OPERATION CHECK [10/2015 - ]
).
- Check that the display changes between ON and OFF according to the light control switch operation.
OK
Light Control Switch Display Tail or head ON Off OFF HINT:
This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.
Result:
OK
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY
(Refer to REMOVAL [10/2014 - ] )
Result:
NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE
(Refer to PROBLEM SYMPTOMS TABLE [10/2014 - 10/2015] or PROBLEM SYMPTOMS TABLE [10/2015 - ] )
- Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check (Refer to OPERATION CHECK [10/2014 - 10/2015]
or OPERATION CHECK [10/2015 - ]
).