DTC B2336: Immobiliser Communication ID Unmatched [10/2014 - ]: Procedure

1. Register the remote engine starter ID (Refer to REGISTRATION [10/2014 - ] ).

Result: 

NEXT 

See step  2

1. Clear the DTCs (Refer to DTC CHECK / CLEAR [10/2014 - ] ).
2. Perform the remote hybrid control system starter operation.
3. Check for DTCs.

   OK

   DTC B2336 is not output.

Result: 

OK 

END (REMOTE ENGINE STARTER ID WAS NOT REGISTERED CORRECTLY) 

Result: 

NG 

See step  3

1. Temporarily replace the remote engine starter ECU with a new one (Refer to REMOVAL [10/2014 - ] ).

Result: 

NEXT 

See step  4

1. Register the remote engine starter ID (Refer to REGISTRATION [10/2014 - ] ).

Result: 

NEXT 

See step  5

1. Clear the DTCs (Refer to DTC CHECK / CLEAR [10/2014 - ] ).
2. Perform the remote hybrid control system starter operation.
3. Check for DTCs.

   OK

   DTC B2336 is not output.

Result: 

OK 

END (REMOTE ENGINE STARTER ECU WAS DEFECTIVE) 

Result: 

NG 

REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) 

(Refer to REMOVAL [10/2014 - ] )