DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0151: Lost Communication with Restraints Control Module; DTC U0155: Lost Communication with Instrument Panel Cluster (IPC) Control Module; DTC U0293: Lost Communication with HV ECU [10/2014 - 10/2015]: Procedure
- CHECK FOR DTC
- Clear the DTCs (Refer to DTC CHECK / CLEAR [10/2014 - ] ).
- Check for DTCs (Refer to DTC CHECK / CLEAR [10/2014 - ]
).
OK
DTCs are not output.
Result:
OK
USE SIMULATION METHOD TO CHECK
(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2014 - 10/2015] )
Result:
NG
GO TO CAN COMMUNICATION SYSTEM
(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2014 - 10/2015] )