Inspection [10/2014 - ]: Procedure
- INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH
- Connect a positive (+) lead from the auxiliary battery to terminal 1 and a negative (-) lead to terminal 2.
- Check that the side turn signal light comes on.
OK
The light comes on.
TEXT IN ILLUSTRATION*a Component without harness connected
(Side Turn Signal Light Assembly LH)If the result is not as specified, replace the side turn signal light assembly LH.
- Connect a positive (+) lead from the auxiliary battery to terminal 1 and a negative (-) lead to terminal 2.
- INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH
- Connect a positive (+) lead from the auxiliary battery to terminal 1 and a negative (-) lead to terminal 2.
- Check that the side turn signal light comes on.
OK
The light comes on.
TEXT IN ILLUSTRATION*a Component without harness connected
(Side Turn Signal Light Assembly RH)If the result is not as specified, replace the side turn signal light assembly RH.
- Connect a positive (+) lead from the auxiliary battery to terminal 1 and a negative (-) lead to terminal 2.