Inspection [10/2014 - ]: Procedure
- INSPECT FRONT TURN SIGNAL LIGHT ASSEMBLY LH
- Remove the front turn signal light assembly LH.
- Apply auxiliary battery voltage to the front turn signal light assembly LH and check that the lights come on.
OK
Condition Specified Condition Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 3The turn signal light comes on Auxiliary battery positive (+) → Terminal 2
Auxiliary battery negative (-) → Terminal 3The parking light comes on TEXT IN ILLUSTRATION*a Component without harness connected
(Front Turn Signal Light Assembly LH)If the result is not as specified, replace the front turn signal light socket.
- INSPECT FRONT TURN SIGNAL LIGHT ASSEMBLY RH
- Remove the front turn signal light assembly RH.
- Apply auxiliary battery voltage to the front turn signal light assembly RH and check that the lights come on.
OK
Condition Specified Condition Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 3The turn signal light comes on Auxiliary battery positive (+) → Terminal 2
Auxiliary battery negative (-) → Terminal 3The parking light comes on TEXT IN ILLUSTRATION*a Component without harness connected
(Front Turn Signal Light Assembly RH)If the result is not as specified, replace the front turn signal light socket.