LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Avalon Hybrid Limited >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (Service Information) (Hybrid) >> Driving Support Ecu >> Removal [10/2015 - ] >> Procedure

Removal [10/2015 - ]: Procedure

  1. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY 

    Refer to REMOVAL [10/2014 - ]

  2. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 37

  3. REMOVE DRIVING SUPPORT ECU ASSEMBLY 
    1. Remove the nut and disengage the guide.
      GTY602425Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connector and remove the driving support ECU assembly.
      NOTE:

      Do not reuse the driving support ECU assembly if it has been dropped or subjected to a severe impact.