Skid Control ECU Communication Stop Mode [10/2014 - 10/2015]: Description

Detection Item	Symptom	Trouble Area
Skid Control ECU Communication Stop Mode	Either condition is met: "Skid Control (ABS/VSC/TRAC)" is not displayed on the CAN Bus Check screen of the Techstream (Refer to PROBLEM SYMPTOMS TABLE [10/2014 - 10/2015] ) Communication system DTCs (DTCs that start with U) that correspond to "Skid Control ECU Communication Stop Mode" in "DTC Combination Table" are output (Refer to DIAGNOSIS SYSTEM [10/2014 - 10/2015] )	Skid control ECU (brake booster with master cylinder assembly) branch line or connector Power source circuit of skid control ECU (brake booster with master cylinder assembly) Skid control ECU (brake booster with master cylinder assembly) ground circuit Skid control ECU (brake booster with master cylinder assembly)