Check CAN Bus Line for Short to GND [10/2014 - 10/2015]: Description
There may be a short circuit between one of the CAN bus lines and GND when there is no resistance between terminals 6 (CANH) and 4 (CG) or 14 (CANL) and 4 (CG) of the DLC3.
| Symptom |
Trouble Area |
| No resistance exists between terminals 6 (CANH) and 4 (CG) or 14 (CANL) and 4 (CG) of DLC3. |
- Short in CAN main bus line
- Short in CAN branch line
- Combination meter assembly
- Skid control ECU (Brake booster with master cylinder assembly)
- Power management control ECU
- Main body ECU (Multiplex network body ECU)
- Steering sensor
- Air conditioning amplifier assembly
- Airbag ECU assembly
- Certification ECU (Smart key ECU assembly)
- Power steering ECU assembly
- Navigation ECU sub-assembly*1
- Radio and display receiver assembly*2
- ECM
- No. 1 CAN junction connector
- No. 2 CAN junction connector
|
- *1: for Navigation receiver type
- *2: for Radio and display type