LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> RAV4 XLE, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Diagnostics - Introduction - (Except Hybrid) >> Meter / Gauge System >> DTC Check / Clear [12/2012 - ] >> DTC Check / Clear [12/2012 - ]

DTC Check / Clear [12/2012 - ]

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON and turn the Techstream on.
    3. Enter the following menus: Body Electrical / Combination Meter / Trouble Codes.
    4. Check for DTCs.

      Body Electrical > Combination Meter > Trouble Codes 

  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON and turn the Techstream on.
    3. Enter the following menus: Body Electrical / Combination Meter / Trouble Code.
    4. Clear the DTCs.

      Body Electrical > Combination Meter > Clear DTCs 

scientia non olet · About LEMON Manuals