Caution / Notice / Hint
NOTE:
- Before troubleshooting, make sure that the kick door control sensor is not damaged.
- Before troubleshooting, be sure to read Precautions for Touchless Power Back Door.
Refer to PRECAUTION [08/2016 - ]
- If the multiplex network door ECU has been removed and installed or replaced, or if any of the connectors has been disconnected, initialize the power back door system.
Refer to INITIALIZATION [12/2012 - ]
- After performing work, using the Techstream, read the Data List item "Kick Sensor Connection" and check that the kick door control sensor is connected.
Refer to DATA LIST / ACTIVE TEST [08/2016 - ]