LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> RAV4 LE, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seats (Service Information) (Except Hybrid) (2 Of 2) >> FRONT SEAT CUSHION HEATER (for Manual Seat) >> Installation [08/2016 - ] >> Procedure

Installation [08/2016 - ]: Procedure

  1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH 
    1. Set the front seat cushion heater assembly LH on the separate type front seat cushion cover.
    2. GTY383794Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Using a tacker, install the front seat cushion heater assembly LH to the separate type front seat cushion cover with 20 new tack pins as shown in the illustration.

      NOTE:

      Do not substitute other metal parts for tack pins.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER 

    Refer to PROCEDURE - Step 16

  3. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD 

    Refer to PROCEDURE - Step 17

  4. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY 

    Refer to PROCEDURE - Step 24

  5. INSTALL FRONT INNER SEAT CUSHION SHIELD LH (for Driver Side) 

    Refer to PROCEDURE - Step 25

  6. INSTALL FRONT INNER SEAT CUSHION SHIELD RH (for Front Passenger Side) 

    Refer to PROCEDURE - Step 26

  7. INSTALL FRONT SEAT CUSHION SHIELD LH 

    Refer to PROCEDURE - Step 27

  8. INSTALL VERTICAL ADJUSTING HANDLE LH (for Driver Side) 

    Refer to PROCEDURE - Step 28

  9. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH 

    Refer to PROCEDURE - Step 29

  10. INSTALL FRONT SEAT ASSEMBLY LH 

    Refer to INSTALLATION [08/2016 - ]

  11. INSPECT SEAT HEATER SYSTEM 

    Refer to OPERATION CHECK [12/2012 - ]

scientia non olet · About LEMON Manuals