Removal [12/2012 - 08/2016]: Procedure
- REMOVE FRONT SEAT ASSEMBLY RH
HINT:
Use the same procedure as for the driver seat.
Refer to REMOVAL [12/2012 - 08/2016]
- REMOVE RECLINING ADJUSTER RELEASE HANDLE RH
See step 2
- REMOVE FRONT SEAT CUSHION SHIELD RH
See step 3
- REMOVE FRONT INNER SEAT CUSHION SHIELD RH
See step 4
- REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY
See step 5
- REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
- REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
- REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY RH
Cut off the 20 tack pins which fasten the front seat cushion heater assembly RH, and then remove the front seat cushion heater assembly RH from the separate type front seat cushion cover.
NOTE:Be careful not to damage the separate type front seat cushion cover and front seat cushion heater assembly RH.