- REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD LH
- Remove the screw and detach the claw.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Detach the clip, guide and 2 claws in the direction indicated by the arrow shown in the illustration to remove the front inner No. 1 seat cushion shield LH.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE FRONT SEAT CUSHION SHIELD LH
- Detach the clip.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
 |
First |
 |
Second |
- Detach the claw and 3 guides as indicated by the arrows in the order shown in the illustration.
- Detach the 3 claws to open the cover.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Disconnect the 3 connectors and detach the 3 clamps to remove the front seat cushion shield LH.
- REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
- Using a moulding remover, detach the 2 claws to remove the slide and vertical power seat switch knob.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE RECLINING POWER SEAT SWITCH KNOB
- Using a moulding remover, detach the 2 claws to remove the reclining power seat switch knob.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE POSITION CONTROL ECU AND SWITCH ASSEMBLY
Refer to PROCEDURE - Step 6
- REMOVE POWER SEAT SWITCH ASSEMBLY
Refer to PROCEDURE - Step 4
- REMOVE FRONT INNER SEAT CUSHION SHIELD LH
- Detach the 2 claws and 3 guides as indicated by the arrows in the order shown in the illustration to remove the front inner seat cushion shield LH.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
 |
First |
 |
Second |
- REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY
- Disconnect the connector and detach the clamp.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Disconnect the rubber band.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Detach the 4 wire harness clamps and connector clamp.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
| *1 |
Wire Harness Clamp |
| *2 |
Connector Clamp |
- Detach the fastener to disconnect the wire harness of the front seat airbag assembly LH.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Detach the connector clamp and wire harness clamp.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Disconnect the connector.
- Detach the 2 hooks.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the 4 bolts and separate type front seatback assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE FRONT SEAT HEADREST SUPPORT
- Detach the 4 claws to remove the 2 front seat headrest supports.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE SEPARATE TYPE FRONT SEATBACK COVER
- Remove the 5 hog rings.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the 3 hog rings.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Open the 2 fasteners.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the 2 nuts.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Pull the separate type front seatback cover bracket from the separate type front seatback pad.
- Remove the 8 hog rings and separate type front seatback cover from the separate type front seatback pad.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE FRONT SEATBACK HEATER ASSEMBLY LH
Refer to PROCEDURE - Step 8
- REMOVE SEPARATE TYPE FRONT SEATBACK PAD
- Remove the separate type front seatback pad from the separate type front seatback spring assembly LH.
- REMOVE SEATBACK FELT
- Remove the seatback felt from the separate type front seatback spring assembly LH.
- REMOVE FRONT SEAT AIRBAG ASSEMBLY LH
Refer to PROCEDURE - Step 11
- REMOVE FRONT NO. 2 SEAT WIRE LH
- Disconnect the 2 connectors.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Detach the 2 clamps to remove the front No. 2 seat wire LH.
- REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
- Disconnect the connector.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
| *1 |
Wire Harness Clamp |
| *2 |
Connector Clamp |
- Detach the 3 wire harness clamps and connector clamp to disconnect the seat cushion heater wire.
- Detach the 9 hooks to remove the separate type front seat cushion cover with pad.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
- Remove the 21 hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH
Refer to PROCEDURE - Step 8
- REMOVE SEAT POSITION AIRBAG SENSOR
Refer to PROCEDURE - Step 7
- REMOVE FRONT SEAT INNER BELT ASSEMBLY LH
- Detach the 2 wire harness clamps and connector clamp.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
| *1 |
Wire Harness Clamp |
| *2 |
Connector Clamp |
- Detach the 2 clamps.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the nut and front seat inner belt assembly LH.
- REMOVE FRONT LOWER SEAT CUSHION SHIELD LH
- Remove the screw.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Detach the hook in the direction indicated by the arrow in the illustration.
- Detach the clip to remove the front lower seat cushion shield LH.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE FRONT LOWER SEAT CUSHION SHIELD RH
HINT:
Use the same procedure described for the front lower seat cushion shield LH.
- REMOVE FRONT OUTER SEAT CUSHION EDGE PROTECTOR LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
Remove the front outer seat cushion edge protector LH in the direction indicated by the arrow in the illustration.
- REMOVE FRONT INNER SEAT CUSHION EDGE PROTECTOR LH
HINT:
Use the same procedure described for the front outer seat cushion edge protector LH.
- REMOVE SEAT ADJUSTER COVER CAP
- Remove the 2 seat adjuster cover caps from the separate type front seat cushion spring assembly LH.
- REMOVE FRONT SEAT WIRE LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Disconnect the 3 connectors.
- Detach the 6 clamps to remove the front seat wire LH.