Caution / Notice / Hint
NOTE:
- Inspect the fuses for circuits related to this system before performing the following procedure.
- If the replacement, removal and installation of the multiplex network door ECU or disconnection of the connectors of the multiplex network door ECU has been performed, initialize the power back door system.
Refer to INITIALIZATION [12/2012 - ]
- Recognition code registration is necessary when replacing the main body ECU (multiplex network body ECU).
- If the main body ECU (multiplex network body ECU) is replaced, refer to Registration.
Refer to REGISTRATION [12/2012 - ]
- When replacing the main body ECU (multiplex network body ECU), make sure to replace it with a new one.