LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> RAV4 LE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seats (Service Information) (Except Hybrid) (2 Of 2) >> Seat Memory Switch >> Inspection [12/2012 - ] >> Procedure

Inspection [12/2012 - ]: Procedure

  1. INSPECT SEAT MEMORY SWITCH 
    1. Check the resistance.
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection Switch Condition Specified Condition
        3 (M1) - 1 (E) Memory 1 switch on Below 1 Ω
        4 (M2) - 1 (E) Memory 2 switch on Below 1 Ω
        2 (MRY) - 1 (E) SET switch on Below 1 Ω

        If the result is not as specified, replace the seat memory switch.

        GTY374038Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Component without harness connected
        (Seat Memory Switch)
scientia non olet · About LEMON Manuals