DTC CHG_f107: Charger Internal Firmware Mismatch [09/2013 - ]: Procedure

1. Perform the firmware update. Refer to UPLOAD [09/2013 - ] .

NEXT: Go to next step 

1. Connect the RAV4 EV diagnostic tool to the No. 2 DLC3.
2. Turn the power switch on (READY).
3. Turn the RAV4 EV diagnostic tool on.
4. Enter the following menus: Alert List.
5. Read the alert codes.
   RESULT
   
   

   Result	Proceed to
   Alert code is not output	A
   CHG_f107 is output	B

B → See step   3 

A → END