LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Prius V Three >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Battery Management Systems >> Hybrid Battery System (Diagnostic Codes (P0A7F-123 - U029A-123)) >> Hybrid Battery System >> DTC P0AC0-123: Hybrid Battery Pack Current Sensor Circuit Range / Performance [08/2013 - ] >> Confirmation Driving Pattern

Confirmation Driving Pattern

  1. Connect the Techstream to the DLC3.
  2. Turn the power switch on (IG) and turn the Techstream on.
  3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
  4. Turn the power switch off.
  5. Turn the power switch on (IG), wait for 10 seconds or more and then turn the power switch off.
  6. Turn the power switch on (READY) and turn the Techstream on.
  7. Perform a universal trip.
  8. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
  9. Check that permanent DTCs are cleared.

    HINT: 

    • If a permanent DTC is output, the system is malfunctioning.
    • If no permanent DTC is output, the system is normal.
scientia non olet · About LEMON Manuals