On-Vehicle Inspection [12/2013 - ]: Procedure
- INSPECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY (for Vehicle not Involved in Collision)
- Visually check for defects with the rear No. 2 seat outer belt assembly installed to the vehicle.
- The defects to be checked are as follows:
- Cuts on the rear No. 2 seat outer belt assembly
- Small cracks on the rear No. 2 seat outer belt assembly
- Significant discoloration on the rear No. 2 seat outer belt assembly
OK
No defects are found.
HINT:
If any defects are found, replace the rear No. 2 seat outer belt assembly with a new one.
- The defects to be checked are as follows:
- Visually check for defects with the rear No. 2 seat outer belt assembly installed to the vehicle.
- INSPECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY (for Vehicle Involved in Collision)
- Visually check for defects with the rear No. 2 seat outer belt assembly removed from the vehicle.
- The defects to be checked are as follows:
- Cuts on the rear No. 2 seat outer belt assembly
- Small cracks on the rear No. 2 seat outer belt assembly
- Significant discoloration on the rear No. 2 seat outer belt assembly
- Cracks or other damage on the connector
OK
No defects are found.
HINT:
If any defects are found, replace the rear No. 2 seat outer belt assembly with a new one.
- The defects to be checked are as follows:
- Visually check for defects with the rear No. 2 seat outer belt assembly removed from the vehicle.