DTC B161A-8A: Lost Communication with Front Satellite Sensor Bus [12/2013 - ]: Procedure
- CHECK DTC
- Turn the ignition switch to ON, and wait for at least 60 seconds.
- Turn the ignition switch off.
HINT:
If a communication error occurs, DTCs for both the LH and RH sides will be stored simultaneously. To identify the malfunctioning area, turn the ignition switch off and then to ON again.
- Turn the ignition switch to ON, and wait for at least 60 seconds.
- Check for DTCs.
Refer to DTC CHECK / CLEAR [12/2013 - ]
Body Electrical > SRS Airbag > Trouble Codes
HINT:
- DTCs indicating communication errors will be changed to DTCs indicating errors in initialization by turning the ignition switch off and then to ON again.
- Codes other than DTCs B1613-83 and B1618-84 may be output at this time, but they are not related to this check.
Result
Result Proceed to DTCs B1613-83 and B1618-84 are not output. A DTC B1613-83 is output. B DTC B1618-84 is output. C
Result: 2
B
GO TO DTC B1613-83. Refer to DTC B1612-83: Lost Communication with Front Airbag Sensor RH; DTC B1613-83: Front Airbag Sensor RH Initialization Incomplete [12/2013 - ]
Result: 3
C
GO TO DTC B1618-84. Refer to DTC B1617-84: Lost Communication with Front Airbag Sensor LH; DTC B1618-84: Front Airbag Sensor LH Initialization Incomplete [12/2013 - ]
Result: 1
A
See step 2
- CHECK DTC
- Clear the DTCs stored in memory.
Refer to DTC CHECK / CLEAR [12/2013 - ]
Body Electrical > SRS Airbag > Clear DTCs
- Turn the ignition switch off.
- Turn the ignition switch to ON, and wait for at least 60 seconds.
- Check for DTCs.
Refer to DTC CHECK / CLEAR [12/2013 - ]
Body Electrical > SRS Airbag > Trouble Codes
OK
DTC B161A-8A is not output.
HINT:
Codes other than DTC B161A-8A may be output at this time, but they are not related to this check.
Result
Proceed to OK NG
Result: 1
OK
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2013 - 11/2016] Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2016 - ]
Result: 2
NG
REPLACE AIRBAG SENSOR ASSEMBLY. Refer to REMOVAL [12/2013 - ]
- Clear the DTCs stored in memory.