LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 96 (SFI System [2GR-FXE] - Diagnostic Codes - (Hybrid) (1 Of 3)) >> SFI System >> DTC P0401: Exhaust Gas Recirculation Flow Insufficient Detected [02/2014 - 11/2015] >> Description

DTC P0401: Exhaust Gas Recirculation Flow Insufficient Detected [02/2014 - 11/2015]: Description

WARNING: This page is about a different variant/trim than selected.

Based on the driving conditions, the ECM regulates the volume of exhaust gas that is recirculated to the engine's combustion chambers and thus lowers the combustion temperature to reduce NOx emissions. The ECM monitors signals such as engine speed, engine coolant temperature, electric load, and vehicle speed. When the EGR permission conditions are fulfilled, the ECM controls the opening of the EGR valve linearly through signals to the EGR step motor.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
P0401 Exhaust Gas Recirculation Flow Insufficient Detected Change in intake manifold pressure is small when the EGR valve opened and closed during fuel cut operation. (2 trip detection logic)
  • EGR valve assembly
  • EGR passage
  • EGR cooler assembly
  • Intake system
  • Manifold absolute pressure sensor
  • ECM
Comes on DTC stored