LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Engine Cooling Fan System (2GR-FXS) - Diagnostics & Circuit Tests - (Hybrid)) >> Cooling Fan System >> On-Vehicle Inspection [11/2016 - ] >> Procedure

On-Vehicle Inspection [11/2016 - ]: Procedure

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT COOLING FAN SYSTEM 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the Electric Cooling Fan.

      Powertrain > Engine and ECT > Active Test 

      Tester Display
      Control the Electric Cooling Fan
    5. Check the operation of the fan while operating it using the Techstream.

      If the cooling fan motor does not operate, check the cooling fan circuit.

      Refer to Cooling Fan Circuit [11/2016 - ] .

scientia non olet · About LEMON Manuals