On-Vehicle Inspection [11/2016 - ]: Procedure
WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT COOLING FAN MOTOR LH
- Disconnect the cooling fan motor LH connector.
- Check that the cooling fan motor LH operates smoothly when the auxiliary battery is connected to the cooling fan motor LH connector.
*a Component without harness connected
(Cooling Fan Motor LH)HINT:
The auxiliary battery voltage is between 11 to 14 V.
- Measure the current while the cooling fan motor LH is operating.
Standard Current
Condition Specified Condition Auxiliary battery voltage applied at 20°C (68°F) 13.5 to 24.0 A If the result is not as specified, replace the cooling fan motor LH.
- Connect the cooling fan motor LH connector.
- INSPECT COOLING FAN MOTOR RH
- Disconnect the cooling fan motor RH connector.
- Check that the cooling fan motor RH operates smoothly when the auxiliary battery is connected to the cooling fan motor RH connector.
*a Component without harness connected
(Cooling Fan Motor RH)HINT:
The auxiliary battery voltage is between 11 to 14 V.
- Measure the current while the cooling fan motor RH is operating.
Standard Current
Condition Specified Condition Auxiliary battery voltage applied at 20°C (68°F) 13.5 to 24.0 A If the result is not as specified, replace the cooling fan motor RH.
- Connect the cooling fan motor RH connector.