LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System (Interior) - Service Information - (Except Hybrid) >> Luggage Compartment Room Light >> Inspection [12/2013 - ] >> Procedure

Inspection [12/2013 - ]: Procedure

  1. INSPECT NO. 1 ROOM LIGHT ASSEMBLY 
    1. Apply battery voltage to the connector and check that the No. 1 room light comes on.
      GTY443769Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (No. 1 Room Light Assembly)

      OK

      Measurement Condition Condition Specified Condition
      Battery positive (+) → 2 (B)
      Battery negative (-) → 1 (L)      		 Always No. 1 room light comes on

      If the result is not as specified, replace the bulb or No. 1 room light assembly.

scientia non olet · About LEMON Manuals