Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
ALL:
| The monitor will run whenever this DTC is not present. (Not circuit malfunction) |
P0712, P0713 (ATF temperature sensor circuit (TFT sensor)) P0115, P0117, P0118 (ECT sensor circuit) P0715, P0717 (Turbine speed sensor circuit) P0791, P0793 (Intermediate shaft speed sensor circuit) P0748 (Shift solenoid valve SL1 circuit) P0778 (Shift solenoid valve SL2 circuit) P0798 (Shift solenoid valve SL3 circuit) P2810 (Shift solenoid valve SL4 circuit) P0327, P0328, (KCS sensor circuit) P0120, P0121, P0122, P0123, P0220, P0222, P0223, P0604, P0606, P060A, P060B, P060D, P060E, P0657, P1607, P2102, P2103, P2111, P2112, P2118, P2119, P2135 ((ETCS) Electronic throttle control system) U0100 (CAN communication system) |
| Transmission range | "D" |
| TFT (Transmission fluid temperature) | -10°C (14°F) or more |
| TFT (Transmission fluid temperature) sensor circuit | No circuit malfunction |
| ECT (Engine coolant temperature) sensor circuit | No circuit malfunction |
| Turbine speed sensor circuit | No circuit malfunction |
| Intermediate shaft speed sensor circuit | No circuit malfunction |
| Shift solenoid valve SL1 circuit | No circuit malfunction |
| Shift solenoid valve SL2 circuit | No circuit malfunction |
| Shift solenoid valve SL3 circuit | No circuit malfunction |
| Shift solenoid valve SL4 circuit | No circuit malfunction |
| (KCS) Knock control sensor circuit | No circuit malfunction |
| (ETCS) Electronic throttle control system | Not system down |
| CAN communication system | Not system down |
| Engine | Starting |
OFF MALFUNCTION (A):
| ECM select gear | 3rd or 5th |
| Throttle valve opening angle | 3% or more |
OFF MALFUNCTION (B):
| ECM select gear | 3rd |
| Throttle valve opening angle | 6.5% or more |
| Vehicle speed | 1.2 mph (2 km/h) or more |
| ECT (Engine coolant temperature) | 40°C (104°F) or more |
| Turbine speed/Output speed (NT/NO) with 1st | 3.232 to 7.556 |
| Turbine speed/Output speed (NT/NO) with 2nd | 1.860 to 2.289 |
| Turbine speed/Output speed (NT/NO) with 3rd | 1.369 to 1.613 |
| Turbine speed/Output speed (NT/NO) with 4th | 0.976 to 1.113 |
| Turbine speed/Output speed (NT/NO) with 5th | 0.690 to 0.818 |
| Turbine speed/Output speed (NT/NO) with 6th | 0.556 to 0.680 |
ON MALFUNCTION (A):
| ECM select gear | 1st |
| Time after transmission to 1st gear | 0.1 sec. or more |
| Vehicle speed | 1.2 mph (2 km/h) to 24.9 mph (40 km/h) |
| ECT (Engine coolant temperature) | 40°C (104°F) or more |
| Turbine speed/Output speed (NT/NO) with 1st | 3.232 to 7.556 |
| Turbine speed/Output speed (NT/NO) with 2nd | 1.860 to 2.289 |
| Turbine speed/Output speed (NT/NO) with 3rd | 1.369 to 1.613 |
| Turbine speed/Output speed (NT/NO) with 4th | 0.976 to 1.113 |
| Turbine speed/Output speed (NT/NO) with 5th | 0.690 to 0.818 |
| Turbine speed/Output speed (NT/NO) with 6th | 0.556 to 0.680 |
ON MALFUNCTION (B):
| ECM select gear | 2nd |
| Throttle valve opening angle | 6.5% or more at engine speed 2, 000 rpm (condition varies with engine speed) |
| Vehicle speed | 1.2 mph (2 km/h) or more |
| ECT (Engine coolant temperature) | 40°C (104°F) or more |
| Turbine speed/Output speed (NT/NO) with 1st | 3.232 to 7.556 |
| Turbine speed/Output speed (NT/NO) with 2nd | 1.860 to 2.289 |
| Turbine speed/Output speed (NT/NO) with 3rd | 1.369 to 1.613 |
| Turbine speed/Output speed (NT/NO) with 4th | 0.976 to 1.113 |
| Turbine speed/Output speed (NT/NO) with 5th | 0.690 to 0.818 |
| Turbine speed/Output speed (NT/NO) with 6th | 0.556 to 0.680 |
ON MALFUNCTION (C):
| ECM select gear | 6th |
| Throttle valve opening angle | 6.5% or more at engine speed 2, 000 rpm (condition varies with engine speed) |
| Vehicle speed | 1.2 mph (2 km/h) or more |
| ECT (Engine coolant temperature) | 40°C (104°F) or more |
| Turbine speed/Output speed (NT/NO) with 1st | 3.232 to 7.556 |
| Turbine speed/Output speed (NT/NO) with 2nd | 1.860 to 2.289 |
| Turbine speed/Output speed (NT/NO) with 3rd | 1.369 to 1.613 |
| Turbine speed/Output speed (NT/NO) with 4th | 0.976 to 1.113 |
| Turbine speed/Output speed (NT/NO) with 5th | 0.690 to 0.818 |
| Turbine speed/Output speed (NT/NO) with 6th | 0.556 to 0.680 |
ON MALFUNCTION (D):
| ECM select gear | 4th |
| Throttle valve opening angle | 6.5% or more at engine speed 2, 000 rpm (condition vary with engine speed) |
| Vehicle speed | 1.2 mph (2 km/h) or more |
| ECT (Engine coolant temperature) | 40°C (104°F) or more |
| Turbine speed/Output speed (NT/NO) with 1st | 3.232 to 7.556 |
| Turbine speed/Output speed (NT/NO) with 2nd | 1.860 to 2.289 |
| Turbine speed/Output speed (NT/NO) with 3rd | 1.369 to 1.613 |
| Turbine speed/Output speed (NT/NO) with 4th | 0.976 to 1.113 |
| Turbine speed/Output speed (NT/NO) with 5th | 0.690 to 0.818 |
| Turbine speed/Output speed (NT/NO) with 6th | 0.556 to 0.680 |