LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 40 (Automatic Transmission (U760E) - Diagnostic Codes) >> Automatic Transaxle System >> DTC P0705: Transmission Range Sensor Circuit Malfunction (PRNDL Input) [12/2013 - ] >> Monitor Description

Monitor Description

WARNING: This page is about a different variant/trim than selected.

This DTC indicates a problem with the park/neutral position switch assembly or the wire harness in the park/neutral position switch assembly circuit.

The park/neutral position switch assembly detects the shift lever position and sends signals to the ECM.

For safety, the park/neutral position switch assembly detects the shift lever position so that the engine can be started only when the shift lever is in P or N.

The park/neutral position switch assembly sends a signal to the ECM according to the shift lever position (P, N, R or D). The ECM determines that there is a problem with the switch or related parts if it receives more than 1 position signal simultaneously. The ECM will illuminate the MIL and store this DTC.

scientia non olet · About LEMON Manuals