Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
CASE 1
| Difference between VPA voltage and VPA2 voltage (learned value of accelerator off position) | Less than 0.4 V, or higher than 1.2 V |
CASE 2
| All of the following conditions are met | - |
| [(VPA voltage - Learned VPA accelerator off position voltage) - (VPA2 voltage - Learned VPA2 accelerator off position voltage)] | Higher than 0.165 V (varies with accelerator position) |
| VPA2 voltage | Less than 4.84 V |
| Either of the following conditions met | a or b |
| a) VPA voltage - Learned VPA accelerator off position voltage | 0.04 V or higher |
| b) VPA2 voltage - Learned VPA2 accelerator off position voltage | 0.04 V or higher |