LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (Automatic Transmission (U660E) - Diagnostics - Introduction) >> Automatic Transaxle System >> Registration [12/2013 - 11/2016] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • When the automatic transaxle is replaced, the transaxle compensation code must be input into the TCM (proceed to Procedure 1). After the automatic transaxle is reinstalled, the Quick Response (QR) code label will be positioned where the code cannot be read. Therefore, before reinstalling the automatic transaxle, record the transaxle compensation codes or input them in the Techstream.
  • When the TCM is replaced, the existing transaxle compensation codes must be input into the new TCM (proceed to Procedure 2).
scientia non olet · About LEMON Manuals