LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (Automatic Transmission (U660E) - Service Information (1 Of 2)) >> Speed Sensor >> Installation [12/2013 - 11/2016] >> Procedure

Installation [12/2013 - 11/2016]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL TRANSMISSION REVOLUTION SENSOR 
    1. Coat the 2 bolts with ATF.
      GTY450695Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the transmission revolution sensor to the transmission valve body assembly with the 2 bolts.

      Torque: 10.8 N*m (110 kgf*cm, 8 ft.*lbf) 

    3. Connect the transmission revolution sensor connector.
  2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY 

    Refer to INSTALLATION [12/2013 - 11/2016] 

scientia non olet · About LEMON Manuals