Removal [12/2013 - 11/2016]: Procedure
WARNING: This page is about a different variant/trim than selected.
- REMOVE VALVE BODY OIL STRAINER ASSEMBLY
Refer to REMOVAL [12/2013 - 11/2016]
- REMOVE ATF TEMPERATURE SENSOR ASSEMBLY
- Disconnect the ATF temperature sensor assembly connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the 4 bolts, ATF temperature sensor assembly and clamp from the transmission valve body assembly.
- Remove the O-ring from the ATF temperature sensor assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|