Installation [12/2013 - 11/2016]: Procedure

1. Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly.
2. Coat the 4 bolts with ATF.
3. Install the ATF temperature sensor assembly and clamp to the transmission valve body assembly with the 4 bolts.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a

   Clamp

   Torque: 10.8 N*m (110 kgf*cm, 8 ft.*lbf) 

   Bolt Length

   Bolt (A) 

   25 mm (0.984 in.)

   Bolt (B) 

   85 mm (3.35 in.)

4. Connect the ATF temperature sensor assembly connector.

Refer to INSTALLATION [12/2013 - 11/2016]