LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2014 >> Highlander XLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Starting System (2GR-FKS) (Service Information) (Except Hybrid)) >> Ignition Switch >> Removal [11/2016 - ] >> Procedure

Removal [11/2016 - ]: Procedure

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE STEERING COLUMN ASSEMBLY 

    Refer to REMOVAL [12/2013 - ]

  2. REMOVE UPPER STEERING COLUMN BRACKET WITH SWITCH ASSEMBLY 

    Refer to PROCEDURE - Step 2

  3. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY 
    1. Remove the 2 screws and ignition or starter switch assembly from the upper steering column bracket assembly.
      GTY444073Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals